Marshall Voice with Google Assistant
1. Set the language of the device to the language you want to use with voice commands.
For example, if you want to use voice commands in Thai, set the language of the device, smartphone/iPhone to Thai and install the Google Home app in Thai language.
2. After turning on the device, you will hear a voice prompt to “Download the app “Google Home”". If you do not hear a voice from the speaker, Please reset the speaker by going to step 8.
3. Place the speaker near the Wi-Fi router before connecting between Wi-Fi and the speaker that supports Voice with Google Assistant. Follow the instructions on the screen to connect the speaker to the same Wi-Fi network as your smartphone/iPhone that you want to sync. It is recommended to connect Wi-Fi only to the 2.4 GHz frequency.
4. You must turn on the BLUETOOTH function on your smartphone/iPhone in advance before connecting to Wi-Fi.
5. Start the connection by going to the Google Home App on your Smartphone/iPhone.
5. Steps for setting up in Google Home Application
6. Select a room where the Marshall Voice with Google Assistant device is installed. If connected, there will be a 1-tone alert.
7. After completed set up application, you can use voice commands to open the music app in the language as your set (Thai or English) by saying “OK Google” followed by the supported app. For example, say “OK Google, play Youtube music” or if you want to increase the volume, say “OK Google, increase the volume by 2 bars”.
8. Resetting the speaker to clear the existing connection (this method is used in cases where it has been previously connected and cannot be connected or cannot be connected to Google Home) by pressing the "Source" button and the "Play/Pause" button at the same time. Observe the light on the front that must run from 1 point to full. After that, observe the "Source" button light blink 3 times. Release the button and press the "Source" button. You will hear a sound from the speaker. After that, follow step 2 to set up the app.
Additional instructions:
• Please download the Google Home application before to set up your home/residential Wi-Fi and Voice with Google Assistant speakers before using the Google Home function.
• For more information about applications >> Google Assistant (https://assistant.google.com/)
Download the Google Home application on your mobile phone or device to set up only one device (connect only 1 device per one app).
Press Add a new device on the Google Home application and set up according to the steps on the Google Home application until the process is complete.
• If there is more than 1 speaker, add a new device on the Google Home application until it is complete.
• You can connect to an unlimited number of speakers on Wifi, just within the same Wifi signal range.
• If you want to use speakers to turn on simultaneously, group the speakers using the (group) command in the Google Home application first.
• To share the registered speaker device with a friend or family member, press the "Invite family member" command with the G-MAIL account search icon on the Google Home app.
• For mobile phones or other devices that will play music and receive an invitation, you can download the Google Home app and connect to Wi-Fi, then "Accept Invitation" from the member who registered the first speaker setup. No need to set up again, you can use it through Google Home.